9 Best Heat Transfer Paper for Laser Printers (November 2026)
The best laser printer heat transfer paper include the TransOurDream Tru-Heat Transfer Paper for Inkjet for mixed inkjet and laser light fabric, the Sunnyscopa Waterslide Decal Paper for LASER Printer for clear decals on hard surfaces, and the TransOurDream Upgraded Iron on Heat Transfer Paper for no mirror printing on light fabric.
On this page (9 sections)
- The best heat transfer paper for laser printers, ranked by score
- How the best laser printer heat transfer paper compares on printer type
- How we compared these heat transfer sheets
- Can you use heat transfer paper for a laser printer in an inkjet printer?
- Is laser printer heat transfer paper good for dark shirts?
- What size and sheet count should you buy?
- How do you press heat transfer paper on a shirt?
- Decals and tattoo paper: when heat transfer paper is the wrong pick
- Verdict: which heat transfer paper should you buy?
The best laser printer heat transfer paper for most laser owners is the HTVRONT Heat Transfer Paper for Light T Shirts, because it lists HP, OKI and Brother laserjet printers, includes 25 sheets plus parchment, and works on light cotton and nylon. Pick the Forever Laser Dark No-Cut paper for dark garments with a white toner printer, and pick a decal sheet if you want clear hard surfaces instead of fabric.
Our score weighs specs and features against what you are shopping for. We checked sizes, sheet counts, printer lists, fabric types and press steps across all nine picks.
Start with your printer and your garment color. Light shirts and dark shirts need different coatings, and a sheet made for inkjet ink will not always accept laser toner well.
If you want the broader picture first, our best laser printer transfer paper guide covers the general transfer paper types in more depth.
Our picks at a glance
-
1
Best for mixed inkjet and laser light fabricTransOurDream Tru-Heat Transfer Paper for Inkjet
9.7/10 our score
See it on Amazon -
2
Best for clear decals on hard surfacesSunnyscopa Waterslide Decal Paper for LASER Printer
9.6/10 our score
See it on Amazon -
3
Best for no mirror printing on light fabricTransOurDream Upgraded Iron on Heat Transfer Paper
9.5/10 our score
See it on Amazon
- 4
Check itPrinters Jack Iron-On Heat Transfer Paper
Best for dark fabric with press settings - 5
Check itPPD 50 Sheets 8.5x11 Iron-on Heat Transfer
Best for bulk dark fabric batches - 6
Check itHTVRONT Heat Transfer Paper for Dark T
Best for quick dark shirt presses - 7
Best for small light fabric trialsCheck it - 8
Check itForever Laser Dark No-Cut A+B Paper 8.5
Best for white toner on dark garments - 9
Check itHTVRONT Heat Transfer Paper for Light T
Best for light shirts on laserjet and inkjet
The best heat transfer paper for laser printers, ranked by score
The top picks cover light fabric with laserjet and inkjet use. The lower picks solve narrower jobs, such as clear decals, bulk dark orders, or white toner printing.
TransOurDream Tru-Heat Transfer Paper for Inkjet: Best for mixed inkjet and laser light fabric
- 20 sheets 8.5x11 in plus 2 Teflon sheets
- For light fabrics
- HP, OKI and Brother laser printers listed
- Works with scissors or cutting machine
A dual printer pack for light shirts with Teflon sheets included for the press step.
Pros
- Works with inkjet and listed laser printers
- Teflon sheets included
- Machine washable in cold water
Cons
- Light fabrics only
- No tumble dry
TransOurDream Tru-Heat Transfer Paper suits light shirts when you have both a laser printer and an inkjet printer at home. It lists HP, OKI and Brother laser printers alongside all inkjet printers, which makes it flexible for a mixed office setup.
The pack holds 20 sheets at 8.5x11 in plus 2 Teflon sheets. The Teflon sheets cover the print during pressing, so you do not need a separate cover sheet for the first projects.
TransOurDream says the print stays vivid and vibrant, and the transfer is machine washable with cold water in full cycle mode. It also says no tumble dry, and no peeling or cracking after 30 washes.
You print and cut the image, peel and place it printed side up on fabric, cover it with Teflon paper, press with an iron or heat press, then remove the Teflon paper. That order matters, because the print faces upward on the fabric in this method.
Choose it for light or white t shirts and light fabrics. Skip it for dark garments, because the coating is made for light fabrics and dark colors will not show the same way.
Sunnyscopa Waterslide Decal Paper for LASER Printer: Best for clear decals on hard surfaces
- Clear US Letter 8.5x11 in
- 20 sheets
- For tumblers, mugs, glass and ceramics
- Laser version, not inkjet
A clear laser decal sheet for tumblers and mugs rather than heat pressed shirts.
Pros
- Clear finish for hard surfaces
- 20 sheets in Letter size
- Strong adhesion claims for glass and ceramics
Cons
- Not a fabric heat transfer sheet
- Needs acrylic spray step
Sunnyscopa Waterslide Decal Paper suits tumblers, mugs, glasses and ceramics rather than shirts. It is a clear laser decal sheet at 8.5x11 in, with 20 sheets in the pack.
This pick belongs in a heat transfer guide because many buyers search for laser transfer sheets for decorating fabrics and other surfaces. Decals are that other surfaces category, and they use a different finish step than heat pressing.
You print with a laser printer, then apply the decal to hard surfaces with water and an acrylic spray step. Sunnyscopa says it has strong adherence to glass, ceramics, soap, candles and nails, with tear resistant and smudge proof film.
The clear finish matters for light hard surfaces, because a white backing would show as a rectangle. Sunnyscopa also lists window decals, nail decals, packaging and office decoration as uses.
Choose it for personalized hard surface gifts on clear film. Skip it for t shirts, because this sheet is not made to bond to fabric with heat in the same way as iron on paper.
TransOurDream Upgraded Iron on Heat Transfer Paper: Best for no mirror printing on light fabric
- 15 sheets 8.5x11 in plus 3 Teflon sheets
- Light fabric 70 to 100 percent cotton
- No mirror printing
- Inkjet only
An upgraded light fabric sheet with no mirror printing and reusable Teflon sheets.
Pros
- No mirror printing step
- Reusable Teflon sheets included
- Lower melting point claim
Cons
- Inkjet printers only in its requirements
- Light fabrics only
TransOurDream Upgraded Iron on Heat Transfer Paper suits light fabric crafters who want to skip mirror printing. It is a second generation light transfer paper with 15 sheets at 8.5x11 in plus 3 reusable Teflon sheets.
The no mirror printing step saves time and reduces errors with text. You print the design in the normal orientation, cut it out, place it printed side up on the shirt, cover it with the silicon paper, press, then peel off the cover.
TransOurDream says it has a lower melting point than others and is easy to iron on, with bright, stretchable and durable results. It also says it is easy to cut with a Cricut or other cutting machine.
The requirements list inkjet printers, pigment ink or dye ink, and explicitly say do not use sublimation ink. That limit also matters for laser buyers, because this pack is listed for inkjet use rather than laserjet use.
Choose it for light or white fabrics with 70 to 100 percent cotton, such as t shirts, bags, aprons, masks and pillow cases. Skip it if your only printer is a laser printer.
Printers Jack Iron-On Heat Transfer Paper: Best for dark fabric with press settings
- 20 sheets 8.3x11.7 in
- Dark cotton or nylon, over 60 percent cotton best
- Press at 165 to 185 C for 25 to 30 seconds
- Inkjet only, pigment ink
A dark fabric sheet with stated press time and temperature for inkjet printing.
Pros
- Clear press settings
- Durable and stretchable material claim
- Larger sheet size
Cons
- Inkjet only
- Dark fabrics only
Printers Jack Iron-On Heat Transfer Paper suits dark fabric projects where you need stated press settings. The pack holds 20 sheets at 8.3x11.7 in, a slightly taller sheet than the standard Letter picks here.
It is made for dark color cotton or nylon fabrics, with more than 60 percent cotton content giving the best transfer results. That fabric rule matters, because low cotton blends may not hold the transfer as well.
Printers Jack gives a full press recipe: 25 to 30 seconds at 329 to 365 F, with heavy pressure. You print on the coated soft side, cut the shape, peel the film, place the image side up on fabric, cover with protective paper, press, cool a little, then peel off the protective paper.
The brand says the material is durable and stretchable, absorbs ink well, and withstands washer and dryer cycles. It also advises waiting 24 hours before washing, washing in cold water with the pattern facing inward, and avoiding bleach.
Choose it for black t shirts, bags, pillow cases and aprons in inkjet printing. Skip it for laser printing, because the tools list pigment ink for inkjet printers only.
PPD 50 Sheets 8.5x11 Iron-on Heat Transfer: Best for bulk dark fabric batches
- 50 sheets 8.5x11 in
- Dark fabrics
- Cotton and cotton blend focus
- Inkjet and cutting machines
A 50 sheet dark fabric pack for clubs, schools and repeat orders.
Pros
- Large sheet count
- Bold opaque transfer claim
- Includes alignment tool
Cons
- Inkjet listed, not laser
- Dark fabrics focus
PPD 50 Sheets 8.5x11 Iron-on Heat Transfer suits craft clubs, schools and side hustles that need volume. The pack holds 50 sheets at 8.5x11 in, which is more than double the sheet count of most other picks here.
It is made for dark fabrics, with the best results on cotton or cotton blend fabrics such as dark t shirts, hoodies, tote bags, aprons and pillowcases. PPD says designs are bold, opaque and durable after multiple washes.
The pack includes step by step instructions and a free alignment tool. That tool helps with group settings, where several people press the same design and need consistent placement.
PPD says the transfer bonds firmly with a soft, flexible finish that resists peeling, fading and cracking. It also lists compatibility with inkjet printers and cutting machines, so you can cut shapes with scissors or a cutting tool.
Choose it when you will print many dark fabric items and want a large pack. Skip it for light shirts or laser printing, because this pack is built around dark fabric and inkjet printing.
HTVRONT Heat Transfer Paper for Dark T: Best for quick dark shirt presses
- 20 sheets 8.5x11 in
- Dark cotton or cotton poly blend
- Press at 320 to 338 F for 8 to 12 seconds
- Inkjet dye and pigment ink
A dark shirt sheet with short press time and cutting machine use.
Pros
- Short press time
- Compatible with cutting machines
- Wash durable claim
Cons
- Inkjet only
- Dark fabrics only
HTVRONT Heat Transfer Paper for Dark T Shirts suits quick dark shirt projects with a home iron. The pack holds 20 sheets at 8.5x11 in for dark colored cotton or cotton poly blend fabric.
HTVRONT gives a short press recipe: 320 to 338 F for 8 to 12 seconds. That short time suits smaller designs and repeated presses, but you still need steady pressure across the whole image.
The sheet is listed for inkjet printers with dye ink and pigment ink only. HTVRONT also says it is printable HTV, not standard HTV, and it works with cutting machines for shapes and text.
The brand says the transfer withstands repeated washes without fading, cracking and peeling, and it gives vivid colors on dark shirts. The white backing in dark fabric paper is what keeps light colors visible on black fabric.
Choose it for t shirts, home decor and handmade presents on dark cotton blends. Skip it for light fabrics and for laser printers, because both types are specific to this pack.
Avery Heat Transfer Paper: Best for small light fabric trials
- 5 sheets 8.5x11 in
- Light fabrics and porous surfaces
- Inkjet printable, matte
- Cricut and Silhouette compatible claim
A small 5 sheet pack for testing light fabric transfers at home.
Pros
- Small pack for trials
- Works on fabric, cardboard and wood
- Full instructions included
Cons
- Only 5 sheets
- Inkjet printable
Avery Heat Transfer Paper suits small trials on light fabric and porous surfaces. The pack holds 5 sheets at 8.5x11 in, which is the smallest count in this guide.
It is a matte inkjet printable sheet made for light fabrics, and Avery says it also bonds to cardboard, wood and other porous surfaces. That wider surface list makes it useful for craft projects beyond shirts.
Each sheet is listed as 100 percent cotton with a heat seal backing for bonding. Avery says you can transfer text, images and pictures with a standard iron or a professional heat press, with full instructions in every pack.
You can print on an inkjet printer, then cut the design with scissors or an electric cutting machine. Avery says the transfers are compatible with electronic cutters like Cricut and Silhouette, and designs can also be cut by hand.
Choose it for tote bags, pillows, quilts, blankets, masks and scrubs when you want a small pack to test. Skip it for bulk orders, because 5 sheets will run out fast, and skip it for laser printers.
Forever Laser Dark No-Cut A+B Paper 8.5: Best for white toner on dark garments
- 50 count, 8.5x11 in
- Laser printers with white toner
- OKI white toner recommended
- Self weeding A+B system
A true laser dark garment system for white toner printers, not standard laser printers.
Pros
- Made for laser white toner
- Transparent A foil for alignment
- No cut A+B system
Cons
- Needs white toner printer
- HP and Brother may run too hot
Forever Laser Dark No-Cut A+B Paper suits dark garments when you own a laser printer with white toner. This is the most laser specific pick in the guide, because it is built around toner rather than inkjet ink.
The pack holds 50 count at 8.5x11 in in a self weeding A+B system. The transparent A foil holds the print for alignment, and the B paper coating adheres to toner so only the printed image transfers.
Forever says it is intended for laser printers with white toner, and an OKI white toner printer gives the best results. It also warns that HP and Brother printers tend to run too hot, and no refunds or exchanges will be made if you use them.
The process uses two sheets at the same temperature, around 300 to 320 F. You print on the A foil, press it with the B paper, separate both sheets while hot, and the B sheet carries white coverage for dark garments.
Choose it for white and light colors on dark garments with an OKI white toner printer. Skip it for a standard laser printer without white toner, because the system needs white toner to work.
HTVRONT Heat Transfer Paper for Light T: Best for light shirts on laserjet and inkjet
- 25 sheets 8.5x11 in plus 5 parchment sheets
- HP, OKI and Brother laserjet listed
- Light cotton and nylon, over 60 percent cotton best
- No mirror printing
A light fabric pack that lists laserjet and inkjet use with parchment included.
Pros
- Lists laserjet and inkjet printers
- 25 sheets plus parchment
- No mirror printing
Cons
- Light fabrics only
- Pigment ink recommended for inkjet
HTVRONT Heat Transfer Paper for Light T Shirts suits light shirts when you want laserjet and inkjet options in one pack. The pack holds 25 sheets at 8.5x11 in plus 5 parchment sheets for the press step.
It lists HP, OKI and Brother laserjet printers for higher printing speed, and all inkjet printers for higher quality print. HTVRONT recommends pigment ink for inkjet printing, and it says not to use sublimation ink.
The sheet is made for light color cotton and nylon fabrics, with the best transfer effect on more than 60 percent cotton. That fabric rule helps you avoid low cotton blends that may give a weaker bond.
HTVRONT says the advanced coating means no mirror printing, and the sheet works with all cutting machines. It also says the transfer is soft, stretchable, and withstands up to 30 washes without fading, cracking or peeling.
Choose it for t shirts, bags and pillows in light colors, especially if your laser printer is one of the listed brands. Skip it for dark shirts, because light fabric paper will not give the same opacity on black fabric.
How the best laser printer heat transfer paper compares on printer type
Printer type is the first filter, because laser toner and inkjet ink are different materials. Our guide on how a printer transfers toner onto paper explains the laser side of that process in plain terms.
Two picks list laser printers directly. TransOurDream Tru lists HP, OKI and Brother laser printers with inkjet printers, and HTVRONT for Light T Shirts lists the same laserjet brands with all inkjet printers.
One pick is laser only in a different sense. Forever Laser Dark No-Cut needs a white toner laser printer, so a standard laser printer without white toner will not use it correctly.
The Sunnyscopa decal sheet is laser only, but it is for hard surfaces. It uses toner on a clear decal film, then water and spray for application, not heat for fabric.
Most other picks list inkjet only. That includes TransOurDream Upgraded, Printers Jack, PPD, HTVRONT for Dark, and Avery, so those picks will not solve a laser only setup.
| Product | Best for | Sheet size | Sheet count | Fabric | Our score |
|---|---|---|---|---|---|
| TransOurDream Tru-Heat Transfer Paper for Inkjet | mixed inkjet and laser light fabric | 8.5x11 in | 20 | Light fabrics | 9.7 |
| Sunnyscopa Waterslide Decal Paper for LASER Printer | clear decals on hard surfaces | 8.5x11 in | 20 | 9.6 | |
| TransOurDream Upgraded Iron on Heat Transfer Paper | no mirror printing on light fabric | 8.5x11 in | 15 | Light color, 70 to 100 percent cotton | 9.5 |
| Printers Jack Iron-On Heat Transfer Paper | dark fabric with press settings | 8.3x11.7 in | 20 | Dark color cotton or nylon | 9.4 |
| PPD 50 Sheets 8.5x11 Iron-on Heat Transfer | bulk dark fabric batches | 8.5x11 in | 50 | Dark cotton and natural fabrics | 9.1 |
| HTVRONT Heat Transfer Paper for Dark T | quick dark shirt presses | 8.5x11 in | 20 | Dark cotton or cotton poly blend | 8.9 |
| Avery Heat Transfer Paper | small light fabric trials | 8.5x11 in | 5 | Light fabrics, 100 percent cotton | 8.6 |
| Forever Laser Dark No-Cut A+B Paper 8.5 | white toner on dark garments | 8.5x11 in | 50 | Dark colored garments | 8.2 |
| HTVRONT Heat Transfer Paper for Light T | light shirts on laserjet and inkjet | 8.5x11 in | 25 | Light color cotton and nylon | 8.0 |
How we compared these heat transfer sheets
We compared printer lists, ink types, fabric types, sheet sizes, sheet counts and press steps. We also checked what is included in each pack, such as Teflon sheets, parchment sheets or an alignment tool.
We did not test prints by hand. We compared the stated specs and brand claims, then scored each sheet for fit with a laser printer heat transfer paper search.
A sheet scored higher when it listed laser printers, covered common shirt fabrics, and included the cover sheets needed for pressing. A sheet scored lower when it needed a special printer, such as a white toner model, or when it solved a narrower job, such as clear decals.
Can you use heat transfer paper for a laser printer in an inkjet printer?
Yes, only when the sheet lists both printer types. TransOurDream Tru and HTVRONT for Light list laser and inkjet use, so you can switch printers by project.
Check the ink type as well as the printer type. Several inkjet sheets list pigment ink or dye ink, and most say not to use sublimation ink.
Sublimation ink is made to turn into gas under heat and move into polyester. That process is different from iron on transfer paper, so the sheets here say not to use it.
Laser toner is a dry powder that melts and bonds under heat. Our guide on how a laser printer fuses toner to paper explains why heat and pressure matter for toner bonding.
Test one sheet first if you are unsure. Print a small design, press it on a scrap shirt, wash the shirt in cold water, and check for peeling or cracking before you print a full set.
Laser and inkjet sheets in this guide
Laser listed sheets are TransOurDream Tru, HTVRONT for Light, Sunnyscopa for decals, and Forever for white toner dark garments. Inkjet listed sheets are the other five picks.
Is laser printer heat transfer paper good for dark shirts?
Dark shirts need a white backing layer, or light colors will look dull on black fabric. Dark fabric transfer paper adds that backing in the coating.
Forever is the only pick here built for dark garments with laser toner and white toner. The A+B system transfers white and light colors onto dark garments, and it needs an OKI white toner printer for best results.
For inkjet dark shirts, Printers Jack, PPD and HTVRONT for Dark all use a dark fabric coating. Each pack states its own press time and temperature, so use the settings for your sheet rather than mixing recipes.
Cotton content matters on dark fabric too. Printers Jack says more than 60 percent cotton gives the best results, and HTVRONT for Dark lists cotton or cotton poly blend.
Wash dark shirts with the design facing inward, in cold water, and skip bleach. Printers Jack gives that care advice, and it helps the white backing stay flexible.
Dark fabric options for inkjet and white toner laser
Inkjet dark picks are Printers Jack, PPD and HTVRONT for Dark. White toner laser pick is Forever, with a 50 count A+B system.
What size and sheet count should you buy?
Most picks here use 8.5x11 in Letter size, which fits standard laser and inkjet printers and most cutting machines. Printers Jack uses 8.3x11.7 in, which is a slightly taller sheet.
Sheet count ranges from 5 sheets with Avery to 50 sheets with PPD and Forever. Your count should match your project size, not just the lowest cost per sheet.
Included cover sheets also affect value. TransOurDream Tru includes 2 Teflon sheets, TransOurDream Upgraded includes 3 reusable Teflon sheets, and HTVRONT for Light includes 5 parchment sheets.
PPD includes a free alignment tool, which helps when you press the same design on many shirts. Misaligned prints waste sheets, so alignment tools matter more in bulk work.
Letter size for home printers and cutting machines
Letter size fits home laser printers, inkjet printers and cutting machines without trimming. Check your printer tray and cutting machine mat size before you order a taller sheet.
How do you press heat transfer paper on a shirt?
Pressing always follows the same basic order: print, cut, place, cover, press, peel. Each sheet states its own time and temperature, so use those numbers first.
Printers Jack states 25 to 30 seconds at 329 to 365 F with heavy pressure. HTVRONT for Dark states 8 to 12 seconds at 320 to 338 F.
Forever states 300 to 320 F for its A+B system.
Place the printed image on the fabric in the orientation stated for your sheet. Some sheets print face up with no mirror step, while others may need a different orientation, so check the instructions in your pack.
Cover the print with Teflon paper, parchment or the included cover sheet before pressing. The cover protects the print and the iron or press plate from toner and ink residue.
Peel timing also varies by sheet. Some sheets peel after pressing, while the Forever A+B system separates while hot, so follow the peel step for your exact paper.
Iron versus heat press for home crafters
A heat press gives steady pressure and temperature across the design. A home iron can work, but you need firm, even pressure and full coverage of the design area.
Wait before the first wash if your sheet states a wait time. Printers Jack advises 24 hours before washing, with cold water and the pattern facing inward.
Avoid bleach, harsh chemicals and tumble drying unless your sheet lists them as safe. TransOurDream Tru says no tumble dry, and Avery lists hand wash only in its care details.
Decals and tattoo paper: when heat transfer paper is the wrong pick
Heat transfer paper bonds to fabric with heat. Decal paper bonds to hard surfaces with water and spray, and tattoo paper is made for skin.
Our best decal paper for laser printers guide covers clear and white decal sheets for tumblers, mugs, glass and ceramics. Sunnyscopa is the decal pick in this guide for that reason.
Our best laser printer tattoo paper guide covers temporary tattoo sheets for skin. Those sheets use a different backing and adhesive, so they will not press onto shirts.
Choose heat transfer paper for shirts, bags, aprons, pillow cases and other fabrics. Choose decal paper for hard surfaces, and choose tattoo paper for skin.
Water slide decals also need a clear coat or acrylic spray step in many cases. Sunnyscopa mentions acrylic spray, so plan that step before you print a full set of tumbler decals.
Clear decals for tumblers, mugs and glass
Clear decal film shows the hard surface through the design. That finish suits light colored tumblers, mugs and glassware where a white rectangle would show.
Verdict: which heat transfer paper should you buy?
Pick HTVRONT Heat Transfer Paper for Light T Shirts if you want laserjet and inkjet use on light shirts with 25 sheets and parchment included. Pick TransOurDream Tru if you want a dual printer pack with Teflon sheets for light fabric gifts.
Pick Forever Laser Dark No-Cut if you own a white toner laser printer and need dark garments. Pick Sunnyscopa if your project is a clear decal for a tumbler or mug, not a shirt.
Pick Printers Jack, PPD or HTVRONT for Dark for inkjet dark shirts, based on sheet count and press time. Pick Avery for a small light fabric trial, and pick TransOurDream Upgraded for no mirror printing on light cotton.
The best laser printer heat transfer paper is the sheet that matches your printer, your fabric color and your press method. Check those three items first, then choose by sheet count and included cover sheets.
Next, read our decal or tattoo guides if your project is not fabric, so you buy the right coating for the surface you have in mind.
Our top 3 picks at a glance
-
1
Best for mixed inkjet and laser light fabricTransOurDream Tru-Heat Transfer Paper for Inkjet
9.7/10 our score
See it on Amazon -
2
Best for clear decals on hard surfacesSunnyscopa Waterslide Decal Paper for LASER Printer
9.6/10 our score
See it on Amazon -
3
Best for no mirror printing on light fabricTransOurDream Upgraded Iron on Heat Transfer Paper
9.5/10 our score
See it on Amazon
Frequently asked questions
Can I use laser printer heat transfer paper in an inkjet printer?
Only if the sheet lists inkjet use. Some packs list both printer types, while others list one type only.
Check the printer list and ink type before you print, because laser toner and inkjet ink bond to the coating in different ways.
What is the difference between light and dark fabric transfer paper?
Light fabric sheets are made for white and light shirts, where the fabric shows through the design. Dark fabric sheets add a white backing so colors stay bright on black and dark shirts.
Choose by garment color first, then by printer type.
Do I need a heat press or will an iron work?
Most sheets here list an iron or a heat press machine. A heat press gives steady pressure and temperature, while an iron needs firm, even passes.
Follow the sheet time and temperature, and cover the print with the Teflon or parchment sheet if one is included.
Why does my laser printer need white toner for dark shirts?
Standard laser toner has no white, so light colors fade on dark fabric. A white toner printer can add a white underlayer that keeps colors bright.
The Forever A+B system in this guide is built for that setup on dark garments.
About this guide: Our look at laser printer heat transfer paper draws on maker specs, materials and what owners report. See how we research.



