9 Best Under Desk Printer Stands for Small Spaces (November 2026)
The best under desk printer stands include the VASAGLE 2-Tier Printer Stand with Locking Wheels for most home offices, the HUANUO Printer Stand with Storage Drawer for enclosed drawer storage, and the WESTREE Dual Monitor Stand Riser for dual monitor desks.
On this page (8 sections)
- Best printer stand under desk picks for every desk setup
- How we compared these under desk printer stands
- How much desk clearance do you need for a printer stand under desk?
- Should you choose wheels, a drawer or open shelves?
- Can a desktop riser work as a printer stand under desk?
- What size top should you look for in a printer stand?
- How do you set up and care for an under desk printer stand?
- Verdict: which printer stand under desk should you buy?
The best printer stand under desk for most homes is the VASAGLE 2-Tier Printer Stand with Locking Wheels, because its top holds 99 lb and its lower shelf stores paper where you can reach it. The best printer stand under desk pick changes if your printer is large, your desk is low, or you want a drawer instead of open shelves.
A floor cart reclaims desktop space by placing the printer within available desk clearance. You pull it out to print, then slide it back when you are done.
Our picks at a glance
-
1
Best for most home officesVASAGLE 2-Tier Printer Stand with Locking Wheels
9.7/10 our score
See it on Amazon -
2
Best for enclosed drawer storageHUANUO Printer Stand with Storage Drawer
9.6/10 our score
See it on Amazon -
3
- 4
Best for adjustable heightCheck it - 5
Best for rustic style desksCheck it - 6
Check itFannova 2 Tier Under Desk Printer Stand
Best for large printers - 7
Check itHOOBRO 2-Tier Printer Stand with Charging Station
Best for charging on the stand - 8
Check itVEDECASA 2 Tier Modern White Wooden Under
Best for white desks - 9
Check itECOLOVI 2-Tier Computer Monitor Stand Riser
Best for keyboard storage below
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared size, height, capacity, storage style and mobility across all nine picks.
Best printer stand under desk picks for every desk setup
The VASAGLE leads for everyday use. The two HUANUO models suit smaller storage needs, while the Fannova suits larger printers.
The desktop risers suit a different job, since they sit on the desk rather than under it.
Start with clearance. Measure from the floor to the lowest part of your desk, then measure your printer with paper loaded.
You need room for both.
VASAGLE 2-Tier Printer Stand with Locking Wheels: Best for most home offices
- 18.9 x 15.7 in top
- 13.4 in tall
- 99 lb top capacity
- 33 lb bottom shelf capacity
- 4 wheels, 2 lockable
A two tier cart that slides under a desk, with a lower shelf for paper and folders.
Pros
- High top capacity
- Lower shelf for supplies
- Lockable wheels
Cons
- Fixed height
- Open shelves only
VASAGLE suits a home office where a printer, paper reams and folders compete for space. Its 18.9 by 15.7 inch top fits most inkjet printers and fax machines, and the top holds up to 99 lb with the printer centered.
The ebony black particleboard and steel frame give it a sturdy, industrial look that suits a home office or a shared workroom.
The lower shelf holds up to 33 lb and measures 15.5 by 11.9 inches. That space works for paper, ink cartridges and folders, so supplies stay near the printer instead of on your desk.
The 7.9 inch gap between shelves leaves room for a ream of paper as well as flat files.
Four wheels make the cart easy to roll out for loading paper or clearing a jam. Two wheels lock, which keeps the stand still during printing.
The stand stands 13.4 inches tall, so check that your desk clearance fits it with a printer on top. Assembly uses an Allen key and clear instructions.
The trade off is a fixed height and open shelves only. If you want enclosed storage, compare the HUANUO drawer model below.
HUANUO Printer Stand with Storage Drawer: Best for enclosed drawer storage
- 17.2 x 13.2 in top
- 14.1 in max height
- 38.5 lb capacity
- Storage drawer with dividers
- Locking caster wheels
A rolling cart with a drawer for small supplies and a bottom shelf for paper.
Pros
- Drawer with dividers
- Adjustable height
- Optional wheels
Cons
- Lower capacity than VASAGLE
- Do not move it loaded
HUANUO suits a desk where ink, toner and small supplies need a home. Its drawer with dividers keeps cables and accessories sorted, while the bottom shelf holds paper, books and folders.
The drawer is a clear advantage over open shelves when small items tend to slide, spill or get lost under a desk.
The top platform measures 17.2 by 13.2 inches. HUANUO says it fits paper and 3D printers, and the stand supports up to 38.5 lb.
That capacity suits most home office printers, but check a heavier all in one before you buy. The 7.28 inch clearance between shelves gives room for paper and reference books without crowding the top.
Height adjusts up to 14.1 inches. You can use fewer extensions during assembly for a shorter stand.
That helps under a low desk, but measure first so the printer still fits on top. Four caster wheels swivel 360 degrees and lock.
The wheels are optional, so you can use the stand on a desktop or shelf instead of the floor.
HUANUO warns you not to move the stand while a printer sits on it. Roll it empty, then load it in place.
WESTREE Dual Monitor Stand Riser: Best for dual monitor desks
- 35.8 x 10.2 in platform
- 4.92 in tall
- 68 kg load capacity
- Wood and steel build
- Storage space underneath
A wide riser for two monitors that can also hold a printer or laptop.
Pros
- Very wide platform
- High load capacity
- Open storage below
Cons
- Not a rolling under desk cart
- Low height only
WESTREE suits a dual monitor desk where space is tight. Its 35.8 inch wide platform holds two monitors side by side, and the same surface can hold a printer or laptop when you need it.
At 10.2 inches deep, the platform gives enough depth for monitor bases while keeping a slim profile on the desk.
The stand stands 4.92 inches tall. That height raises a screen to a more comfortable viewing level.
It also leaves open storage underneath for office supplies, notebooks or a small printer accessory tray. The rustic brown wood finish and black steel legs suit a warm, rustic desk setup.
Steel legs and a wood finish give it a sturdy build. The load capacity reaches 68 kg, which covers two monitors or a printer with room to spare.
Thick solid steel legs and anti slip pads help keep the stand stable on a smooth desk surface.
The trade off is that this is a desktop riser, not a rolling cart for under the desk. It frees space below the monitors, but it does not move your printer off the desk.
Choose it for monitor height and storage below.
HUANUO Monitor Stand: Best for adjustable height
- 3 heights: 3.94, 4.72 and 5.51 in
- 44 lb capacity
- Ventilated platform
- 12.4 x 7.09 in space below
- No tools needed
A vented riser with three heights and open storage underneath.
Pros
- Three height settings
- Ventilated platform
- Tool free assembly
Cons
- Small platform for large printers
- Not for under desk floor use
HUANUO Monitor Stand suits a desk where viewing height matters. It offers three heights at 3.94, 4.72 and 5.51 inches.
Press the buttons on the legs to change height without tools. That range lets you match the screen to your chair and desk height instead of fixing one viewing angle for every task.
The platform supports up to 44 lb. That covers a monitor, a laptop up to 15.6 inches wide, or a printer within the width limit.
Check your printer width before you use it as a printer stand. The compact 15.4 by 9.8 inch platform suits a single screen or laptop best.
Open space below measures 12.4 by 7.09 inches. You can store supplies there, or stack two stands to double the storage.
Powder coated steel and a ventilated platform help heat escape from a laptop. Rubber pads add grip and protect the desk surface.
Assembly needs no tools. You screw four legs onto preassembled bolts.
The trade off is a small platform. It does not replace a floor cart for a large printer.
HOOBRO Printer Stand: Best for rustic style desks
- 19.1 x 15.7 in top
- 14.4 in tall
- 88 lb top capacity
- 33 lb bottom capacity
- 2 lockable wheels
A two tier cart in rustic brown and black with open shelves for paper and cartridges.
Pros
- Large top
- High top capacity
- Two lockable wheels
Cons
- Fixed height
- Open shelves only
HOOBRO suits a home office with a rustic or farmhouse style. Its 19.1 by 15.7 inch top holds a copier, laser printer or scanner, and the stand stands 14.4 inches tall.
The rustic brown particleboard and black iron frame blend with wood desks and warm lighting for a classic look.
The top shelf holds up to 88 lb. The bottom shelf holds up to 33 lb for paper, cartridges and small supplies.
Two open shelves keep everything within reach while you sit at the desk. That layout works well for reams of paper, stamps and clips that you need to grab without standing up.
An iron frame and chipboard panels give it a sturdy build. Thick black legs and under shelf support rods help keep it stable.
Four wheels roll the cart where you need it. Two wheels lock, so you can fix it in place for printing.
The trade off is a fixed height and open shelves. Assembly needs an Allen key, which is included.
Measure your desk clearance before you order, since 14.4 inches plus printer height can exceed a low desk.
Fannova 2 Tier Under Desk Printer Stand: Best for large printers
- 20 x 20 in shelves
- 100 lb per tier
- 5 level adjustable top shelf
- X shaped rear support
- Casters and foot pads included
A deep two tier stand with an adjustable top shelf for tall printers.
Pros
- Deepest shelves here
- Adjustable top height
- Foot pads included
Cons
- Large footprint
- Heavier to move
Fannova suits a large or heavy printer that smaller carts cannot hold. Its 20 by 20 inch shelves give more depth than any other pick here.
Each tier holds up to 100 lb. That depth helps a printer with a rear paper tray or a scanner lid that needs full support.
The top shelf adjusts across five levels. You can set the height to fit a taller printer under your desk, or lower it to save space.
The adjustable clearance also helps you match the stand to a desk with a low modesty panel or a hanging drawer.
Steel tubes brace each shelf, and X shaped bars reinforce the back. The frame uses powder coated steel, and the shelves use particleboard with a water and wear resistant surface.
Four casters roll the stand in and out from under the desk. Two casters lock.
Foot pads are included if you want the stand to stay fixed beside the desk instead of rolling.
Assembly uses numbered parts and included tools. The trade off is footprint.
At about 20 inches square, it needs more floor space.
HOOBRO 2-Tier Printer Stand with Charging Station: Best for charging on the stand
- 15 x 11 x 15 in
- 44 lb per tier
- 1 outlet and 1 USB port
- 4 wheels, 2 lockable
- Particleboard build
A compact two tier cart with a built in outlet and USB port.
Pros
- Built in charging
- Compact footprint
- Lockable wheels
Cons
- Smaller top
- Lower capacity
HOOBRO with charging suits a small space where cables pile up. Its 15 by 11 inch top holds a printer, and the stand stands 15 inches tall.
Each tier holds up to 44 lb. The slim profile fits a narrow gap beside a desk or under a low shelf where a wider cart would not fit.
A built in socket adds one outlet and one USB port. You can charge a phone or tablet while the stand sits under your desk.
That keeps a charging cable off your main desk and close to the printer for a quick top up between jobs.
Two open shelves hold a printer, scanner or supplies. Four wheels roll the cart, and two lockable wheels hold it in place.
The 12 mm particleboard gives the shelves a sturdy base for a printer, scanner or a small computer tower.
The trade off is top size and capacity. At 15 inches wide, it suits a smaller printer.
A large all in one may overhang the top. Assembly follows the included instructions with simple parts.
Lock the wheels before you print.
VEDECASA 2 Tier Modern White Wooden Under: Best for white desks
- 17.3 x 11 x 11 in
- 65 lb capacity
- White finish
- Storage bag included
- Casters and skid pads
A low white two tier stand with a fabric storage bag.
Pros
- Low profile
- Storage bag
- White finish
Cons
- Narrow top
- Lower height limits printer size
VEDECASA suits a white desk or a bright room. Its white finish and low 11 inch height blend with light furniture.
The stand measures 17.3 by 11 by 11 inches. That low profile helps it slide under more desks than taller carts in this roundup.
The frame uses heavy duty iron and engineered wood. VEDECASA says it holds up to 65 lb.
That suits a small 3D printer, fax machine, scanner or office supplies. The modern white style suits a dorm, craft room or home office where a black cart would stand out.
A fabric storage bag adds space for books, notebooks and stationery. A metal hook on the side holds headphones, cables or small gadgets.
Four casters swivel 360 degrees, and two lock. Adjustable skid pads are included if you prefer a fixed stand.
The waterproof surface makes cleaning easier. The wood used for the desktop is FSC certified.
The trade off is a narrow top at 11 inches deep. A wide printer may not fit well.
ECOLOVI 2-Tier Computer Monitor Stand Riser: Best for keyboard storage below
- 2 tier structure
- Metal build
- Upper level for screen or printer
- Lower tier for keyboard and supplies
- Simple assembly
A two tier desk riser with a lower shelf for a keyboard or notebooks.
Pros
- Two tier desk storage
- Metal build
- Simple assembly
Cons
- Desktop riser, not floor cart
- No wheels
ECOLOVI suits a desk where a keyboard needs a home below the screen. Its two tier design puts a monitor, laptop or printer on top and a keyboard or notebooks below.
That stacked layout reclaims the area under a monitor that often goes unused.
The upper level holds your screen at a higher viewing level. That can ease neck and shoulder strain during long work sessions.
The black metal build suits most desks and gives the stand a clean, modern look.
Thickened premium steel gives the stand a sturdy build. ECOLOVI says it supports monitors, laptops or printers with stability.
The lower tier holds a keyboard, notebooks or office supplies. That frees desktop space without moving anything to the floor.
Assembly needs few steps and no complicated tools. The trade off is that this is a desktop riser, not a floor cart.
It has no wheels and cannot slide under a desk with a printer on top.
Choose it to organize a crowded desktop. Choose a rolling cart if you need to move your printer off the desk.
How we compared these under desk printer stands
We compared all nine models by top size, height, weight capacity and storage type. Floor carts and desktop risers solve different problems, so we scored each against its own job.
VASAGLE earned the top score for capacity, shelf space and mobility in one design. HUANUO with drawer scored high for enclosed storage and adjustable height.
WESTREE scored high for width and load capacity as a riser.
We checked assembly needs, wheel options and materials from each product data. We also weighed trade offs like fixed height, open shelves and footprint.
A printer stand guide can help you plan the right type before you compare models. If your desk is very small, our best small printer stand under desk picks focus on narrow tops and low height.
How do storage style and mobility affect the score?
Storage style changed the ranking for daily use. A drawer keeps small items sorted and dust free, while open shelves let you see paper and folders at a glance.
Wheels add height but make loading paper easier, so we scored mobility against clearance and stability.
How much desk clearance do you need for a printer stand under desk?
You need clearance for the stand, the printer and your hand. Measure from the floor to the lowest desk part, then add stand height and printer height.
Most floor carts here stand 11 to 15 inches tall. A printer on top adds its full height.
Leave extra room to load paper from the top or back.
Wheels add height. If clearance is tight, check whether the stand can be used without casters.
HUANUO with drawer allows wheel free use.
A best printer stand low profile pick helps when clearance is under 12 inches. A best low printer stand on wheels pick helps when you need to roll a low stand in and out.
What if your desk clearance is very low?
Choose a stand under 12 inches tall, like VEDECASA at 11 inches. Measure again with casters installed, since wheels add height.
If no floor cart fits, use a desktop riser instead. A riser raises the printer on the desk and stores supplies below it.
How do you check cable access under a desk?
Leave gap behind the printer for cables. Most carts here have open backs or sides, which helps airflow and cable routing.
Keep the power cable away from wheel paths. Lock the wheels before you plug in, so the stand does not roll while you work.
Should you choose wheels, a drawer or open shelves?
Wheels suit a printer you pull out often. Lockable casters keep the stand still while printing and let you move it for cleaning.
A drawer suits small supplies like ink, toner and cables. HUANUO with drawer adds dividers, so items stay sorted instead of sliding on an open shelf.
Open shelves suit paper reams and folders. VASAGLE, HOOBRO and Fannova use open tiers that you can see and reach at a glance.
When is a drawer better than open shelves?
A drawer keeps small items out of sight and dust free. It suits a shared room where supplies look messy on open shelves.
Our best under desk printer stand with drawer guide covers drawer models in more detail. Compare drawer depth and divider layout before you buy.
When are wheels worth the extra height?
Wheels add height and can roll on hard floors. They help when you need to pull a printer out for loading paper or clearing a jam.
A best rolling printer stand under desk pick suits a stand you move each day. If the stand will stay fixed, foot pads or a riser may give you more clearance.
Can a desktop riser work as a printer stand under desk?
A desktop riser does not go under the desk. It sits on the desk and raises a printer, monitor or laptop above storage below.
WESTREE, HUANUO Monitor Stand and ECOLOVI work this way. They free desktop space by stacking items vertically instead of spreading them out.
A riser suits a small desk where floor space is not available. It also suits a monitor that needs higher placement for comfort.
Which riser fits a large printer?
WESTREE has the widest platform at 35.8 inches. It suits a printer or two monitors on one surface.
HUANUO Monitor Stand has a smaller platform and a 44 lb limit. Check printer width and weight before you use it.
Which riser gives the most storage below?
ECOLOVI uses a two tier design for a keyboard and notebooks. HUANUO Monitor Stand gives 12.4 by 7.09 inches of open space below.
WESTREE gives open space under a wide platform. Choose by what you will store below, not by height alone.
What size top should you look for in a printer stand?
Measure your printer first, then add margin for paper loading. A top that is too small leaves the printer overhanging the edge.
VASAGLE and HOOBRO give tops near 19 inches wide. Fannova gives 20 inches square for large printers.
VEDECASA and HOOBRO with charging give narrower tops for small devices.
A best printer cabinet under desk option suits a printer you want to hide behind doors. A cabinet needs more floor space than an open cart.
How do you measure a printer for a stand?
Measure width, depth and height with paper loaded and any tray extended. Add space for cables at the back.
Compare those numbers with top size and stand height. Keep the printer centered on the top for balance.
What if your printer is wider than the top?
Choose a wider cart or a desktop riser with a wide platform. Do not let a heavy printer overhang the edge.
Fannova and WESTREE give the widest surfaces here. Check load capacity as well as size.
How do you set up and care for an under desk printer stand?
Place the stand on a flat floor and lock the wheels. Center the printer on the top shelf and check that it does not wobble.
Load paper from the top or back, depending on your printer design. Keep supplies on the lower shelf within the weight limit for that shelf.
Wipe particleboard and wood surfaces with a soft cloth. Tighten screws after the first week, since stands can settle after assembly.
Verdict: which printer stand under desk should you buy?
Pick VASAGLE if you want one stand for a printer, paper and folders. Pick Fannova if your printer is large or heavy.
Pick HUANUO with drawer if small supplies need enclosed storage.
Pick HOOBRO with charging if you need an outlet and USB port under your desk. Pick VEDECASA if you want a low white stand for a bright room.
Pick WESTREE, HUANUO Monitor Stand or ECOLOVI if a desktop riser fits your space better than a floor cart. Measure clearance and printer size first, then choose by storage style and mobility.
If color matters, our best under desk printer stand white guide covers light finishes. For a wide view of the best printer stand under desk options, start with VASAGLE and adjust for size, height and storage.
Our top 3 picks at a glance
-
1
Best for most home officesVASAGLE 2-Tier Printer Stand with Locking Wheels
9.7/10 our score
See it on Amazon -
2
Best for enclosed drawer storageHUANUO Printer Stand with Storage Drawer
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
What height should an under desk printer stand be?
Measure the clearance under your desk first, then leave space above the printer for paper loading and cable access. Most floor carts here sit between 11 and 15 inches tall.
Risers for desktop use sit under 6 inches.
Can I mount a printer under my desk?
Most stands here slide under the desk on wheels rather than mounting to it. An under desk printer stand mount can fix a stand in place, but check desk thickness and weight limits before drilling.
Rolling carts are safer to move for cleaning.
How much weight can a printer stand hold?
Capacities in this roundup range from 38.5 lb to 100 lb per tier. Weigh your printer, then add paper and supplies on the same shelf.
Keep the load centered and lock the wheels before you print.
Do I need wheels on an under desk printer stand?
Wheels help you pull a printer out for loading paper or clearing a jam. Lockable casters keep the stand still while printing.
If your stand will stay in one spot, foot pads or a fixed riser can work as well.
About this guide: Our look at under desk printer stands draws on maker specs, materials and what owners report. See how we research.



