6 Best Dust Covers for Canon Printers (November 2026)
The best Canon printer dust covers include the CaSZLUTION Printer Dust Cover Compatible with Canon for Canon Pixma owners, the ALHBEJT Printer Dust Cover for HP/Epson/Canon/Brother Wireless for shared printer spaces, and the COCOBOW Universal Elastic Waterproof Printer Dust Cover for an adjustable closure.
On this page (6 sections)
- The best Canon printer dust covers for different setups
- How do you choose the right Canon printer dust cover size?
- Is a custom or universal Canon printer cover better?
- Which cover material works best for dust and spills?
- How should you cover and care for a Canon printer?
- Which Canon printer dust cover should you choose?
The best Canon printer dust cover for most Pixma owners is the CaSZLUTION cover, thanks to its Canon-focused sizing, anti-static 290T twill composite fabric and adjustable bungee cord bottom.
That choice suits a compatible Pixma used now and then, since a cover keeps dust from settling on the body while the printer sits idle between jobs.
Choose a DigitalDeckCovers model for a custom imagePROGRAF fit, or a universal cover when you want broader brand compatibility. Canon printers range from compact home models to large photo printers, and a cover cut for one size group will not suit another without extra space or exposed edges.
A dust cover helps keep an idle printer away from dust, spills, fingerprints and other everyday debris. That protection is most noticeable in shared rooms near a doorway, a craft desk or a dusty shelf.
The right choice depends on your Canon model, available space and how closely you want the cover to fit. Closely fitted covers look tidy and stay put more easily, while looser universal covers give more room yet can shift.
Measure the printer before you decide, including its length, width and height in its normal stored position. Allow a little room for the fabric to drape without pressing against controls or lifting over a fixed rear support.
Think about how often you print, since a rarely used printer gains more from a cover than one used every day. A daily printer still benefits at night, yet you will remove and replace the cover more often.
Consider where the printer lives, because a quiet home office, a busy kitchen counter and a small workroom create different risks. Dust is common everywhere, while spills and pet hair depend more on the exact location.
Look at the closure as well as the fabric, since the bottom edge decides whether the cover stays in place. An elastic or bungee edge can hold gently, while an open bottom is simpler to lift but offers less enclosure.
Check care needs before you buy, because wipe-clean fabric suits a quick routine and washable fabric may suit a dustier setup. Storage matters too, so think about where the folded cover will go when the printer is in use.
If you want a wider comparison first, read our guide to the best printer dust cover. This roundup focuses on Canon-compatible options, from compact Pixma covers to larger imagePROGRAF designs.
That order helps separate a custom fit from a universal fit, which is the main choice in this group. Custom covers reduce guesswork for named models, while universal covers offer flexibility when brands or models may change.
Our picks at a glance
-
1
Best for Canon Pixma ownersCaSZLUTION Printer Dust Cover Compatible with Canon
9.7/10 our score
See it on Amazon -
2
Best for shared printer spacesALHBEJT Printer Dust Cover for HP/Epson/Canon/Brother Wireless
9.6/10 our score
See it on Amazon -
3
Best for an adjustable closureCOCOBOW Universal Elastic Waterproof Printer Dust Cover
9.3/10 our score
See it on Amazon
- 4
Check itDigitalDeckCovers Dust Cover for Canon imagePROGRAF PRO-300/PRO-310/PRO-200
Best for PRO-300 series printers - 5
Check itDigitalDeckCovers Dust Cover for Canon imagePROGRAF PRO-1000
Best for PRO-1000 and PRO-1100 - 6
Check itMozkeTo19 Universal Dust Cover For Printers
Best for compact Canon Pixma models
The best Canon printer dust covers for different setups
The CaSZLUTION cover is the best match for many Canon Pixma owners, while the DigitalDeckCovers options are better for specific imagePROGRAF models. Universal covers make sense when you use more than one printer brand or want an adjustable fit.
Our score weighs specs, features and buyer feedback against what you're shopping for. The products are listed from highest score to lowest.
CaSZLUTION Printer Dust Cover Compatible with Canon: Best for Canon Pixma owners
- About 17.9 x 14.9 x 6.7 in
- 290T twill composite fabric
- Anti-static and waterproof
- Bungee cord bottom
A Canon-focused cover for several Pixma models, with a lightweight one-piece shape and adjustable bungee cord bottom.
Pros
- Fits several Canon Pixma models
- Anti-static and waterproof fabric
- Easy to wipe clean
Cons
- Model and size checks are required
- Designed around a specific size range
CaSZLUTION is the strongest overall pick for Canon Pixma owners who want a cover built around a familiar Canon size range. Its stated dimensions are about 17.9 x 14.9 x 6.7 in, and it is designed for the Canon Pixma MG3620, TR4720, TR8620a, TS3720, TS4320, TS6420a, TS6520, TS702a and TS7720.
The cover also works with HP Smart Tank 5000, 5101 and 5103 printers. Check your exact printer measurements before ordering because model names alone do not confirm a close fit.
Its 290T twill composite fabric is anti-static, waterproof and soft to the touch. The lightweight one-piece design uses a bungee cord bottom, so you can adjust the tightness around the printer.
Care is simple. Dust and stains can be wiped from the water-resistant surface with a damp cloth, and the cover folds for storage when you are not using it.
Choose this cover when you own a compatible Canon Pixma and want a close, adjustable fit. Its main trade-off is that the design centers on a particular size range rather than every Canon printer.
ALHBEJT Printer Dust Cover for HP/Epson/Canon/Brother Wireless: Best for shared printer spaces
- About 20 x 16 x 12 in
- Oxford fabric
- Waterproof and dustproof
- Pull-on one-piece design
A larger universal-style cover for similarly sized HP, Epson, Canon and Brother wireless printers.
Pros
- Works across several printer brands
- Large stated size
- Washable for reuse
Cons
- Fit depends on measuring first
- No custom Canon model fit
ALHBEJT is the best fit for a home or office where printers from different brands share the same space. Its about 20 x 16 x 12 in size suits similarly sized HP, Epson, Canon and Brother wireless printers.
The cover is made from Oxford fabric and has a waterproof, dustproof design. It uses a lightweight one-piece pull-on shape, so putting it on or taking it off does not require a separate frame or several pieces.
The larger dimensions give it more room than the compact Canon-focused options here, but that flexibility makes measuring more important. A loose cover may look untidy, while a cover that is too small may leave areas exposed.
ALHBEJT describes the cover as washable for repeated reuse. That makes it a practical choice for a printer in a busy office, craft room or shared workspace where dust collects often.
Pick it when cross-brand compatibility matters more than a custom Canon fit. Confirm the printer's size first, especially if the device has a tall rear paper support or extended tray.
COCOBOW Universal Elastic Waterproof Printer Dust Cover: Best for an adjustable closure
- Elastic polyester fabric
- Waterproof coating
- Drawstring and metal buckle
- Wipe-clean or machine-wash care
A flexible black cover for most standard printers, with a drawstring and metal buckle to tighten the bottom.
Pros
- Adjustable drawstring closure
- Waterproof fabric
- Simple cleaning options
Cons
- No exact printer dimensions stated
- Universal fit may need more adjustment
COCOBOW suits Canon owners who want an adjustable bottom closure without choosing a fixed model-specific shape. Its elastic polyester fabric is designed for most standard printers and has a waterproof coating.
The key feature is the drawstring with a metal buckle. Tighten it around the lower edge of the printer to help hold the cover in place, then loosen it when you need to remove the cover.
The black cover is lightweight and flexible. COCOBOW describes it as suitable for protecting a printer from dust, water spills, pet hair and other debris, so it can fit a home workspace where the printer sits unused between jobs.
Cleaning is flexible too. The cover can be wiped clean or machine washed, according to the product information.
Follow the care directions that come with the cover before washing it.
Choose COCOBOW when closure adjustment is your main concern. The trade-off is that no exact printer dimensions are stated, so compare the cover's fit with your Canon printer before relying on it.
DigitalDeckCovers Dust Cover for Canon imagePROGRAF PRO-300/PRO-310/PRO-200: Best for PRO-300 series printers
- Fits Canon PRO-300, PRO-310 and Pixma PRO-200
- 600D nylon with PVC lining
- Anti-static and water-resistant
- 25.2 x 25.2 x 7.9 in
A custom-made cover for selected Canon photo printers, using heavy-duty nylon, a PVC lining and reinforced construction.
Pros
- Specific fit for 3 Canon models
- Heavy-duty 600D nylon
- Folds flat and wipes clean
Cons
- Fits fewer models than universal covers
- Open closure design
DigitalDeckCovers makes this option for the Canon imagePROGRAF PRO-300, PRO-310 and Pixma PRO-200. It is the best choice here for owners of those three photo printers who want a custom-made cover instead of a broad universal design.
The cover measures 25.2 x 25.2 x 7.9 in and uses heavy-duty 600D nylon with a PVC lining. That construction creates a thicker barrier against dust and debris than a light fabric cover, while the anti-static and water-resistant design adds protection against static buildup and moisture.
Its open closure keeps the design simple. The cover folds flat for storage and can be cleaned with a damp cloth, which helps when the printer is used only for occasional photo work.
DigitalDeckCovers also describes reinforced serged seams, heavy-duty thread and a double-hemmed bottom. Those construction details matter when you remove and replace the cover often.
Choose this model only if your printer is one of the three named Canon models. Its custom fit is the advantage, while its narrow compatibility is the main limitation.
DigitalDeckCovers Dust Cover for Canon imagePROGRAF PRO-1000: Best for PRO-1000 and PRO-1100
- Fits Canon imagePROGRAF PRO-1000 and PRO-1100
- 600D nylon with PVC lining
- Anti-static and water-resistant
- 28.5 x 28.5 x 11.2 in
A larger custom cover for Canon's PRO-1000 and PRO-1100, with heavy-duty nylon and a double-hemmed bottom.
Pros
- Made for 2 large Canon models
- Heavy-duty 600D nylon
- Folds flat for storage
Cons
- Only fits selected imagePROGRAF models
- Open closure design
This DigitalDeckCovers model is designed for the Canon imagePROGRAF PRO-1000 and PRO-1100. It is the right match for owners of those larger photo printers who want a cover made around the exact series.
The stated size is 28.5 x 28.5 x 11.2 in, making it the largest cover in this group by its listed dimensions. It uses 600D nylon with a PVC lining, plus an anti-static and water-resistant design.
A double-hemmed bottom helps give the lower edge a finished fit, while serged seams and heavy-duty thread support repeated handling. The open closure leaves the cover easy to lift away when you need to use the printer.
The cover folds flat and can be wiped clean with a damp cloth. DigitalDeckCovers describes the fabric as made to withstand heat and light without discoloring, drying out or deteriorating.
Pick it for a PRO-1000 or PRO-1100, not for a smaller Pixma. Its strength is exact model coverage for a large Canon printer, while its limited compatibility means model checking is essential.
MozkeTo19 Universal Dust Cover For Printers: Best for compact Canon Pixma models
- 13.8 x 18.1 x 5.9 in
- Quilted 600D nylon
- Waterproof material
- Top handle and open bottom
A compact universal cover for selected Canon Pixma, HP and Brother models, with a top handle and open bottom.
Pros
- Compact stated dimensions
- Waterproof quilted nylon
- Includes 2 cleaning cloths
Cons
- Requires careful size matching
- Open bottom gives less enclosed coverage
MozkeTo19 is the most compact option in this group by its stated dimensions. Its 13.8 x 18.1 x 5.9 in size is designed for selected Canon Pixma models, including the MG3620, TS6420a, TS7720 and TS3520.
It also fits selected HP and Brother printers, including the HP DeskJet 2855e and 2755Se, HP Smart Tank 5101 and 5000, and Brother MFC-J1010DW. Measure your printer carefully because a compact cover leaves little room for error.
The cover uses quilted 600D nylon with a waterproof finish. Its top handle makes it easier to lift, and the open bottom lets you fold and store it without much space.
MozkeTo19 includes 2 cleaning cloths with the cover. The fabric is intended to help block dust, spills, scratches, water and pet-related debris around an idle printer.
Choose this model when your Canon printer matches the compact dimensions and you value a top handle. The open bottom is convenient, but it provides less enclosed coverage than a tightened elastic or drawstring edge.
How do you choose the right Canon printer dust cover size?
The right Canon printer dust cover should match the printer's length, width and height with enough room for the cover to sit without pressing into the controls or paper path. Custom models reduce guesswork, while universal models require more careful measuring.
Measure the printer in its normal stored position. Include the main body and any fixed parts that remain in place when the printer is idle, but do not measure a tray that you remove before covering the printer.
The products here fall into three useful size groups:
- Compact Pixma coverage: MozkeTo19 measures 13.8 x 18.1 x 5.9 in.
- Canon-focused Pixma coverage: CaSZLUTION measures about 17.9 x 14.9 x 6.7 in.
- Larger or professional coverage: DigitalDeckCovers models measure 25.2 x 25.2 x 7.9 in or 28.5 x 28.5 x 11.2 in.
ALHBEJT gives a larger universal size of about 20 x 16 x 12 in, while COCOBOW does not state exact dimensions. For COCOBOW, compare the cover's stretch and closure design with your printer's shape before ordering.
Is a custom or universal Canon printer cover better?
A custom Canon printer cover is better when you know the exact model and want a close fit. A universal cover is better when your printer may change or when one cover needs to work across Canon, HP, Epson or Brother devices.
The DigitalDeckCovers options are the most specific choices here. One is made for the PRO-300, PRO-310 and PRO-200, while the other is made for the PRO-1000 and PRO-1100.
CaSZLUTION also targets a group of Canon Pixma models, with an adjustable bungee cord to help set the fit. Its compatibility list includes several Pixma models and three HP Smart Tank models.
ALHBEJT, COCOBOW and MozkeTo19 offer more flexible designs. That flexibility can help in a shared office, but it makes accurate measuring more important because the cover is not built around one Canon body shape.
Which cover material works best for dust and spills?
Waterproof or water-resistant fabric is useful when the printer sits near drinks, craft supplies or other sources of moisture.
The material still needs correct use, because a cover should not be left on during printing or used as a substitute for careful spill cleanup.
CaSZLUTION uses 290T twill composite fabric with anti-static and waterproof properties.
DigitalDeckCovers uses 600D nylon with a PVC lining, and both of its Canon-specific models are described as anti-static and water-resistant.
MozkeTo19 uses quilted 600D nylon with a waterproof design.
ALHBEJT uses Oxford fabric and is described as waterproof, while COCOBOW uses elastic polyester fabric with a waterproof coating.
For cleaning, CaSZLUTION, DigitalDeckCovers and COCOBOW describe wipe-clean care.
ALHBEJT is described as washable for reuse, and COCOBOW can be wiped or machine washed.
How should you cover and care for a Canon printer?
Turn the printer off before covering it and remove loose dust from the outside. Make sure the printer is not in an active print or maintenance cycle.
Check the surrounding surface, since dust on the desk or shelf can settle on the printer as you place the cover. Remove the cover completely before printing to keep paper feeding clear and avoid any risk of the fabric catching during operation.
Keep the cover clean so dust does not transfer back to the printer. Use a damp cloth when the material allows it, and follow the care instructions for washable covers.
Shake or brush off loose dust outdoors when the design allows, then wipe the surface to remove the fine layer that remains. Let the cover dry fully before you put it back on, because trapped moisture is not helpful for an idle device.
A closure should hold the cover in place without pulling hard against the printer. Adjust CaSZLUTION's bungee cord, COCOBOW's drawstring or any stretchable edge gently, and avoid trapping cables or blocking access to controls.
Tighten the edge only until the fabric sits evenly around the base without bunching at one corner. If the cover lifts at the front, loosen and reset it rather than forcing the edge into place.
Avoid covering a warm printer and let it cool after a long print run before draping the fabric over it. That pause also gives you a chance to check the output tray, paper guides and loading area.
Store a folded cover in a dry place when it is not in use. A clean drawer, a shelf away from direct damp or a dry cupboard all work well for storage.
Keep the folded cover away from sharp objects that could snag the fabric or weaken a coated surface. A cover protects an idle printer from everyday debris, but it should not prevent normal ventilation or access during operation.
Treat the cover as protection for storage periods rather than as part of the printing setup. Lift it off with both hands when possible, especially on larger printers, so the fabric does not drag across controls.
Set the cover down in a clean spot while you print, rather than leaving it on a dusty floor or desk edge. Once printing ends, check that the printer has finished and cooled, then replace the cover smoothly over the body.
Give the top fabric a quick wipe if dust has collected during the day, and adjust the bottom edge so it rests evenly. Repeat that routine consistently, and the cover will stay easier to use and keep dust from building up on the printer.
Which Canon printer dust cover should you choose?
Choose CaSZLUTION for a compatible Canon Pixma, especially if you want anti-static fabric and an adjustable bottom.
It suits owners who want a Canon-focused shape without moving up to a large photo printer cover.
Choose DigitalDeckCovers when you own a PRO-200, PRO-300, PRO-310, PRO-1000 or PRO-1100 and want a model-specific cover.
That choice makes sense when exact model coverage matters more than using one cover across different brands.
Pick ALHBEJT for a larger shared-brand printer space, or COCOBOW if a drawstring and metal buckle matter most.
ALHBEJT suits a larger printer in a mixed-brand setup, while COCOBOW suits an owner who wants to tighten the lower edge by hand.
Choose MozkeTo19 when your Canon printer matches its compact dimensions and you want a top handle with 2 cleaning cloths.
That option fits a smaller printer and a simple lift-off routine, provided the measurements match closely.
Before you decide, compare the printer height, width and length with the stated cover size for each option.
A cover that is too small will leave edges exposed, while a cover that is too large may look loose and shift during use.
Consider the room as well, because a printer near pets, drinks or craft supplies needs more regular wiping and checking.
A printer in a quiet, low-dust office may need less frequent care, yet the cover still helps between occasional print jobs.
Think about storage too, since a folded cover needs a clean, dry place when the printer is back in use.
If you move the printer between rooms, a lighter cover and a simple closure can make daily handling easier.
If the printer stays in one place, a closer fit and a firmer bottom edge may suit your routine better.
Match the material to the care routine you will actually follow, whether that is wiping with a damp cloth or washing a cover for reuse.
Avoid leaving any cover on during printing, and check that cables and controls remain clear before you drape it over the printer.
If someone in your household uses a Brother printer, our guide to the best dust covers for Brother printers is the next useful comparison.
Use that guide to check whether a different shape or size would suit the other printer more closely.
Then return to your Canon model, confirm the measurements once more, and choose the cover that matches the printer you own now.
Our top 3 picks at a glance
-
1
Best for Canon Pixma owners
CaSZLUTION Printer Dust Cover Compatible with Canon
9.7/10 our score
See it on Amazon -
2
Best for shared printer spaces
ALHBEJT Printer Dust Cover for HP/Epson/Canon/Brother Wireless
9.6/10 our score
See it on Amazon -
3
Best for an adjustable closure
COCOBOW Universal Elastic Waterproof Printer Dust Cover
9.3/10 our score
See it on Amazon
Frequently asked questions
What is the best Canon printer dust cover?
The CaSZLUTION cover is the strongest general choice for Canon Pixma owners because it is sized for several Pixma models and uses anti-static, waterproof 290T twill composite fabric. For Canon imagePROGRAF printers, choose the DigitalDeckCovers model made for your exact PRO series.
Measure the printer before ordering because Canon models vary in size.
How do I choose a dust cover for a Canon printer?
Start with the printer's length, width and height, then compare those measurements with the cover. A custom cover can reduce exposed areas, while a universal cover gives more flexibility across brands and models.
Also check the closure, material and whether you need a cover that folds flat or can be washed.
Can I use a universal cover on a Canon printer?
Yes, a universal cover can work when its dimensions match your Canon printer. ALHBEJT, COCOBOW and MozkeTo19 are universal-style options with different size or closure designs.
Check that the cover does not press against controls, trays or cables before leaving it on the printer.
How should I use a Canon printer dust cover?
Turn the printer off and let it finish any active print or maintenance cycle before covering it. Remove loose debris from the printer, place the cover over the device without blocking required ventilation, and wipe the cover when dust builds up.
Remove the cover before printing.
